diff --git a/Set-NetworkHardening.ps1 b/Set-NetworkHardening.ps1
deleted file mode 100644
index 0d0a2e3..0000000
--- a/Set-NetworkHardening.ps1
+++ /dev/null
@@ -1,226 +0,0 @@
-function Set-NetworkHardening {
-    <#
-    .SYNOPSIS
-    Hardens the network stack by disabling legacy and insecure protocols and services.
-
-    .DESCRIPTION
-    This cmdlet applies a set of hardening actions via registry and Windows feature settings.
-    It allows selectively disabling:
-
-    - IPv6
-    - LLMNR (Link-Local Multicast Name Resolution)
-    - NBNS (NetBIOS over TCP/IP)
-    - mDNS (Multicast DNS)
-    - SMB 1.0
-    - SMB 2.0 (also disables SMB 3.0)
-
-    You can use individual parameters or apply all changes using `-All`. Use `-Reset` to undo all changes.
-
-    .PARAMETER DisableIPv6
-    Disables IPv6 networking support by modifying the Tcpip6 registry key.
-
-    .PARAMETER DisableLLMNR
-    Disables LLMNR name resolution via DNSClient group policy registry.
-
-    .PARAMETER DisableNBNS
-    Disables NetBIOS over TCP/IP on all network adapters.
-
-    .PARAMETER DisableMDNS
-    Disables mDNS multicast resolution support via dnscache registry key.
-
-    .PARAMETER DisableSMB1
-    Disables SMB 1.0 via Windows Features or registry fallback.
-
-    .PARAMETER DisableSMB2
-    Disables SMB 2.0 and SMB 3.0 by setting SMB2 = 0 in the LanmanServer registry key (only if no custom shares exist).
-
-    .PARAMETER All
-    Enables all above parameters unless explicitly overridden.
-
-    .PARAMETER Reset
-    Reverts all applied changes to their default state.
-
-    .EXAMPLE
-    Set-NetworkHardening -All
-
-    .EXAMPLE
-    Set-NetworkHardening -DisableLLMNR -DisableSMB1
-
-    .EXAMPLE
-    Set-NetworkHardening -Reset
-
-    .NOTES
-    Author: SVSMSP Toolkit
-    Some changes may require a reboot to take full effect.
-    #>
-
-    [CmdletBinding()]
-    param (
-        [switch]$DisableIPv6,
-        [switch]$DisableLLMNR,
-        [switch]$DisableNBNS,
-        [switch]$DisableMDNS,
-        [switch]$DisableSMB1,
-        [switch]$DisableSMB2,
-        [switch]$All,
-        [switch]$Reset
-    )
-
-    function Reset-NetworkHardening {
-        Write-Host "`n[RESET] Reverting all settings to default..." -ForegroundColor Yellow
-
-        $keysToRemove = @(
-            @{ Path = "HKLM:\SYSTEM\CurrentControlSet\Services\Tcpip6\Parameters"; Name = "DisabledComponents" },
-            @{ Path = "HKLM:\SOFTWARE\Policies\Microsoft\Windows NT\DNSClient"; Name = "EnableMulticast" },
-            @{ Path = "HKLM:\SYSTEM\CurrentControlSet\Services\Dnscache\Parameters"; Name = "EnableMDNS" },
-            @{ Path = "HKLM:\SYSTEM\CurrentControlSet\Services\LanmanServer\Parameters"; Name = "SMB2" }
-        )
-
-        foreach ($key in $keysToRemove) {
-            if (Test-Path $key.Path) {
-                Remove-ItemProperty -Path $key.Path -Name $key.Name -ErrorAction SilentlyContinue
-                Write-Host " → Removed $($key.Path)\$($key.Name)"
-            }
-        }
-
-        $nbnsPath = "HKLM:\SYSTEM\CurrentControlSet\Services\NetBT\Parameters\Interfaces"
-        Get-ChildItem -Path $nbnsPath | ForEach-Object {
-            try {
-                Set-ItemProperty -Path $_.PsPath -Name NetbiosOptions -Value 0
-                Write-Host " → Set $($_.PsPath)\NetbiosOptions = 0"
-            } catch {
-                Write-Warning "Failed to reset NetbiosOptions for $($_.PsPath)"
-            }
-        }
-
-        $smb1reg = "HKLM:\SYSTEM\CurrentControlSet\Services\mrxsmb10"
-        if (Test-Path $smb1reg) {
-            Set-ItemProperty -Path $smb1reg -Name Start -Value 3
-            Write-Host " → Set $smb1reg\Start = 3"
-        }
-
-        Write-Host "`n✅ Reset complete. Reboot may be required." -ForegroundColor Green
-    }
-
-    if ($Reset) {
-        Reset-NetworkHardening
-        return
-    }
-
-    if ($All) {
-        if (-not ($DisableIPv6.IsPresent))  { $DisableIPv6  = $true }
-        if (-not ($DisableLLMNR.IsPresent)) { $DisableLLMNR = $true }
-        if (-not ($DisableNBNS.IsPresent))  { $DisableNBNS  = $true }
-        if (-not ($DisableMDNS.IsPresent))  { $DisableMDNS  = $true }
-        if (-not ($DisableSMB1.IsPresent))  { $DisableSMB1  = $true }
-        if (-not ($DisableSMB2.IsPresent))  { $DisableSMB2  = $true }
-    }
-
-    function Disable-IPv6 {
-        $regPath = "HKLM:\SYSTEM\CurrentControlSet\Services\Tcpip6\Parameters"
-        $name = "DisabledComponents"
-        $value = 0xFF
-
-        Write-Host "`n[IPv6] Disabling via registry..." -ForegroundColor Cyan
-        New-ItemProperty -Path $regPath -Name $name -PropertyType DWORD -Value $value -Force | Out-Null
-        Write-Host " → Set $regPath\$name = $value"
-    }
-
-    function Disable-LLMNR {
-        $regPath = "HKLM:\SOFTWARE\Policies\Microsoft\Windows NT\DNSClient"
-        $name = "EnableMulticast"
-        $value = 0
-
-        Write-Host "`n[LLMNR] Disabling via registry..." -ForegroundColor Cyan
-        if (-not (Test-Path $regPath)) {
-            New-Item -Path $regPath -Force | Out-Null
-        }
-        New-ItemProperty -Path $regPath -Name $name -PropertyType DWORD -Value $value -Force | Out-Null
-        Write-Host " → Set $regPath\$name = $value"
-    }
-
-    function Disable-NBNS {
-        $regPath = "HKLM:\SYSTEM\CurrentControlSet\Services\NetBT\Parameters\Interfaces"
-        Write-Host "`n[NBNS] Disabling NetBIOS over TCP/IP on all adapters..." -ForegroundColor Cyan
-
-        Get-ChildItem -Path $regPath | ForEach-Object {
-            try {
-                Set-ItemProperty -Path $_.PsPath -Name NetbiosOptions -Value 2
-                Write-Host " → Set $($_.PsPath)\NetbiosOptions = 2"
-            } catch {
-                Write-Warning "Failed to set NetbiosOptions for $($_.PsPath)"
-            }
-        }
-    }
-
-    function Disable-mDNS {
-        $regPath = "HKLM:\SYSTEM\CurrentControlSet\Services\Dnscache\Parameters"
-        $name = "EnableMDNS"
-        $value = 0
-
-        Write-Host "`n[mDNS] Disabling via registry..." -ForegroundColor Cyan
-        if (-not (Test-Path $regPath)) {
-            New-Item -Path $regPath -Force | Out-Null
-        }
-        New-ItemProperty -Path $regPath -Name $name -PropertyType DWORD -Value $value -Force | Out-Null
-        Write-Host " → Set $regPath\$name = $value"
-    }
-
-    function Disable-SMB1 {
-        Write-Host "`n[SMB1] Disabling SMB 1.0..." -ForegroundColor Cyan
-        try {
-            Disable-WindowsOptionalFeature -Online -FeatureName SMB1Protocol -NoRestart -ErrorAction Stop
-            Write-Host " → Disabled via Windows Optional Features"
-        } catch {
-            Write-Warning "SMB1 disable via feature failed. Falling back to registry."
-            $reg = "HKLM:\SYSTEM\CurrentControlSet\Services\LanmanServer\Parameters"
-            $name = "SMB1"
-            $value = 0
-            New-ItemProperty -Path $reg -Name $name -PropertyType DWORD -Value $value -Force | Out-Null
-            Write-Host " → Set $reg\$name = $value"
-        }
-
-        $clientReg = "HKLM:\SYSTEM\CurrentControlSet\Services\mrxsmb10"
-        if (Test-Path $clientReg) {
-            Set-ItemProperty -Path $clientReg -Name Start -Value 4
-            Write-Host " → Set $clientReg\Start = 4 (Disabled)"
-        }
-    }
-
-    function Disable-SMB2And3 {
-        Write-Host "`n[SMB2/3] Checking for custom SMB shares..." -ForegroundColor Cyan
-
-        try {
-            $shares = Get-SmbShare | Where-Object {
-                $_.Name -notin @('ADMIN$', 'IPC$') -and -not ($_.Name -match '^[A-Z]\$')
-            }
-
-            if ($shares.Count -gt 0) {
-                Write-Warning "Custom SMB shares detected. SMB 2/3 will NOT be disabled."
-                $shares | ForEach-Object {
-                    Write-Host " → $($_.Name)  [$($_.Path)]"
-                }
-                return
-            }
-        } catch {
-            Write-Warning "Failed to query SMB shares: $_"
-            return
-        }
-
-        Write-Host "No custom SMB shares found. Disabling SMB 2.0 and 3.0..." -ForegroundColor Cyan
-        $reg = "HKLM:\SYSTEM\CurrentControlSet\Services\LanmanServer\Parameters"
-        $name = "SMB2"
-        $value = 0
-        New-ItemProperty -Path $reg -Name $name -PropertyType DWORD -Value $value -Force | Out-Null
-        Write-Host " → Set $reg\$name = $value"
-    }
-
-    if ($DisableIPv6)  { Disable-IPv6 }
-    if ($DisableLLMNR) { Disable-LLMNR }
-    if ($DisableNBNS)  { Disable-NBNS }
-    if ($DisableMDNS)  { Disable-mDNS }
-    if ($DisableSMB1)  { Disable-SMB1 }
-    if ($DisableSMB2)  { Disable-SMB2And3 }
-
-    Write-Host "`n✅ Network hardening complete. Reboot may be required for changes to apply." -ForegroundColor Green
-}